3.1OSD (On-Screen Display) menu
3.1.1How to reconfigure
1.Touch the 
sensor to activate the OSD menu.
2.Touch 
and
to navigate through the functions. Highlight and
activate the desired function by touching the 
sensor. If the
function selected has a 
and 
again to navigate through the
desired 
sensor.
3.Touch 
and 
to change the settings of the selected function.
4.To exit the OSD menu, touch the 
sensor. Repeat step 2 and step 3 to adjust any other function.
3.1.2OSD function introduction
See the table on the next page for details.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
•Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.
3 - 2 | Chapter 3: General Instruction |