Asus PG191 manual LifeFrame software, Introduction and installation instructions

3.3LifeFrame software

3.3.1Introduction and installation instructions

To capture snapshots or video clips, ASUS PG191 provides an easy-to-use LifeFrame that can work with the built-in webcam, allowing users to create their own photos or video clips.

•LifeFrame only supports Microsoft® Windows® 2000/XP operating

systems.

•Before starting to use this software, install LifeFrame into your PC.

•The LifeFrame software is bundled in the PG191 support CD.

System requirements are as follows:

1.A personal computer with Pentium® III 800 MHz or higher processor

2.Microsoft® Windows® 2000/XP operating systems

3.Minimum 200 MB free hard disk space to run the program

4.128 MB of RAM or above

5.A display card supporting 16-bit high color mode

Installation instructions:

1.Close all other applications.

2.Insert the support CD into the optical drive and run the LifeFrame program.

3.Follow the on-screen instructions to complete the installation

Make sure that you connect the USB plug of the supplied 4-in-1 cable to the USB port at the back of the LCD monitor; otherwise, the built-in webcam and LifeFrame will not be activated.

ASUS LCD Monitor PG191 3 - 5