Asus MB17, MB19 manual Connecting the cables

Page 16

2.1Connecting the cables

1.Connect the cables as shown:

 

 

 

Power cord

Audio cable

VGA cable

DVI cable

•To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, and then connect the other end to the computer multi-media (or audio) card’s audio output.

•To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

•To connect the VGA/DVI cable:

a.Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.

b.Connect the other end of the VGA/DVI cable to your computer’s

VGA/DVI port.

c.Tighten the two screws to secure the VGA/DVI connector.

2.Gather all the cables, then hold them with the cable holder. Align the cable holder to the two slots near the base and close it carefully. A click indicates that the cable holder has been closed securely.

Cable holder

2-

Chapter 2: Setup

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User Guide E2624 First Edition May Table of contents Federal Communications Commission Statement Safety information Care & Cleaning Following symptoms are normal with the monitorWhere to find more information Package contents Product introduction Features Assembling the monitor baseMonitor introduction Front of the LCD monitorHeadphone is purchased separately Rear of the LCD monitor Product introduction Setup Connecting the cables Adjusting the monitor Turning the monitor onSetup General Instruction OSD On-Screen Display menu OSD Menu TableImage Troubleshooting FAQ Specification summary MB19SE TFT LCDSpecifications are subject to change without notice Specification summary MB19TU Specification summary MB19TU Specification summary MB17SE Specification summary MB17SE Supported operating modes VGAGeneral Instruction
Top Page Image Contents