Asus VW225XL, VW202XL Disassembling the monitor base for product packing, Connecting the cables

2.4Disassembling the monitor base (for product packing)

To disassemble the monitor base

1.Lower the monitor to its lowest height, and then insert the monitor height adjustment lock.

2.Have the front of the monitor face down on a table.

3.Press and hold the release button on the monitor base and remove the monitor base from the monitor arm.

3

1

2.5Connecting the cables

1.Connect the cables as the following instructions:

•To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer's audio-out port.

•To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

•To connect the VGA/DVI cable:

a.Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.

b.Connect the other end of the VGA/ DVI cable to your computer’s VGA/

DVI port.

c.Tighten the two screws to secure the VGA/DVI connector.

2-4 Chapter 2: Setup