Asus VW195XL, VW202XL, VW225XL manual Image, Color

Page 20

2.Image

You can adjust brightness, contrast, sharpness, saturation, position (VGA only), ASCR, and focus (VGA only) from this main function.

Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function.

Contrast: the adjusting range is from 0 to 100.

ASCR: turns on/off the ASCR(ASUS Smart Contrast Ratio) function.

Sharpness: the adjusting range is from 0 to 100.

Saturation: the adjusting range is from 0 to 100.

Position: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100.

Focus: reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100.

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

3.Color

Select the image color you like from this function.

Color Temp.: contains five color modes including Cool, Normal, Warm, sRGB, and User mode.

Skin Tone: contains three color modes including Reddish, Natural, and Yellowish.

In the User mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0-100.

3-2

Chapter 3: General Instruction

Image 20
Contents VW195xL VW202xL VW225xL Series LCD Monitor E3774 First Edition July Contents Federal Communications Commission Statement Canadian Department of Communications StatementTCO Development ErgonomicsEnergy EmissionsSafety information Care & Cleaning Following symptoms are normal with the monitorWhere to find more information Asus websites Optional documentationPackage contents WelcomeMonitor introduction Front viewRear connectors Back viewProduct introduction Assembling the monitor base Adjusting the monitor angles Detaching the arm/base for Vesa wall mountTwo screws Arm/base To connect the VGA/DVI cable Connecting the cablesDisassembling the monitor base for product packing Turning on the monitor Setup OSD On-Screen Display menu SpendidImage ColorInput Select System SetupOSD Setup Specifications summary VW195xL Series TFT LCDSpecifications summary VW202xL Series Specifications summary VW225xL Series Troubleshooting FAQ Possible SolutionStandard Resolution Horizontal Vertical Pixel Frequency Supported operating modes