Asus E3379 manual Assembling the monitor base, Adjusting the monitor

Page 13

2.1Assembling the monitor base

To assemble the monitor base:

1.Have the front of the monitor face down on a table.

2.Connect the base with the arm according to the below drawing. A click shows that the base has been connected successfully.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2.2Adjusting the monitor

For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.

Hold the stand to prevent the monitor from falling when you change its angle.

You can adjust the monitor’s angle from -5˚ to 20˚.

-5˚~20˚

It is normal that the monitor slightly shakes while you adjust the the viewing angle.

ASUS VW195 Series LCD Monitor

2-

Image 13
Contents User Guide Copyright 2007 ASUSTeK Computer INC. All Rights Reserved E3379 First Edition AugustContents Canadian Department of Communications Statement Federal Communications Commission StatementErgonomics TCO DevelopmentEnergy EmissionsSafety information Conventions used in this guide Care & CleaningAsus websites Optional documentation Where to find more informationWelcome Package contentsFront view Monitor introductionBack view Rear connectorsProduct introduction Assembling the monitor base Adjusting the monitorDetaching the arm/base For Vesa wall mount Turning on the monitor Connecting the cablesConnect the cables as the following instructions To connect the VGA/DVI cableSetup Press the Menu button to activate the OSD menu OSD On-Screen Display menuSpendid Color ImageInput Select System SetupTFT LCD Specifications summary VW195USpecifications summary VW195T Specifications summary VW195S Specifications summary VW195D Possible Solution Troubleshooting FAQPixel Supported operating modesGeneral Instruction