Asus VW202XR, VW202B manual Assembling the monitor base, Adjusting the monitor

Page 13

2.1Assembling the monitor base

To assemble the monitor base:

1.Have the front of the monitor face down on a table.

2.Connect the base with the arm according to the below drawing. A click shows that the base has been connected successfully.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2.2Adjusting the monitor

•For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.

•Hold the stand to prevent the monitor from falling when you change its angle.

•You can adjust the monitor’s angle from -3º to 20º.

-3º~20º

It is normal that the monitor slightly shakes while you adjust the the viewing angle.

ASUS VW202xR/VW202B LCD Monitor

2-

Image 13

Contents User Guide E3826 Second Edition April Contents Canadian Department of Communications Statement Federal Communications Commission StatementErgonomics TCO DevelopmentEnergy EmissionsSafety information Following symptoms are normal with the monitor Care & CleaningConventions used in this guide Asus websites Optional documentation Where to find more informationWelcome Package contentsFront view Monitor introductionBack view Rear connectorsProduct introduction Assembling the monitor base Adjusting the monitorDetaching the arm/base For Vesa wall mount Turning on the monitor Connecting the cablesSetup OSD On-Screen Display menu How to reconfigureOSD Function Introduction SpendidColor ImageInput Select System SetupSystem requirements Asus EzLink Display VW202B onlyHardware Supporting operating systemInstalling Asus EzLink Display Using Asus EzLink Display TFT LCD Specifications summary VW202TRSpecifications summary VW202SR Specifications summary VW202DR Specifications summary VW202B Possible Solution Troubleshooting FAQPixel Supported operating modes