1.3Monitor introduction
1.3.1Front view
1 | 2 | 3 | 4 | 5 | 6 | 7 | 7 |
1.
•Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function).
2. button:
•Selects a desired preset mode.
•Exits the OSD menu or goes back to the previous menu when the OSD menu is active.
•Automatically adjusts the image to its optimized position, clock, and phase by pressing this button for
3.
•Decreases values or moves your selection left/down.
•Volumn hotkey
4.MENU button:
•Turns on the OSD menu. Enacts the selected OSD menu item.
5.
•Increases values or moves your selection right/up.
•Brightness hotkey
6. button:
•Selects an available input source.
Press (Input Select button) to display HDMI/DisplayPort signals after you connect HDMI/DisplayPort cable with the monitor.
Chapter 1: Product introduction |