2.1Detaching the arm/stand (for VESA wall mount)
The detachable stand of the VS197/VS198 Series LED monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1.Pull the stop lever and turn anticlockwise to unlock.
2.Detach the base from the monitor.
3.Use your fingers gently pull away the plate that covers the stand neck. Use a screwdriver to remove the four screws that secure the stand to the monitor.
4.Detach the stand from the monitor.
•We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
•Hold the stand of the monitor while removing the screws.
2
1 |
3 
5 
4 
• The VESA wall mount kit ( 75 x 75 mm) is purchased separately.
•Use only the UL Listed Wall Mount Bracket with minimum weight/ load according to the model listed in the specification table (Screw size: M4 x 10 mm).
Chapter 2: Setup |