Asus VW195 manual Detaching the arm/base For Vesa wall mount

2.3Detaching the arm/base

(for VESA wall mount)

The detachable arm/base of the VW195 Series LCD monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes (Figure 1).

3.Use a screwdriver to remove the two screws on the arm (Figure 1), then slide out the arm/base to detach it from the monitor (Figure 2).

	Rubbers in the
	screw holes
	Two screws
	Arm/base
Figure 1	Figure 2

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2- Chapter 2: Setup