Asus VW195 manual Troubleshooting FAQ, Possible Solution

Page 24

3.3Troubleshooting (FAQ)

Problem

Power LED is not ON

Possible Solution

Press the button to check if the monitor is in the ON mode.

Check if the power cord is properly connected to the monitor and the power outlet.

The power LED lights amber and there is no • Check if the monitor and the computer are

screen imagein the ON mode.

• Make sure the signal cable is properly connected the monitor and the computer.

• Inspect the signal cable and make sure none of the pins are bent.

• Connect the computer with another available monitor to check if the computer is properly working.

Screen image is too light or dark

Adjust the Contrast and Brightness settings via OSD.

Screen image is not centered or sized properly

Press the button for two seconds to automatically adjust the image.

Adjust the H-Position or V-Position settings via OSD.

Screen image bounces or a wave pattern is present in the image

Make sure the signal cable is properly connected to the monitor and the computer.

Move electrical devices that may cause electrical interference.

Screen image has color defects (white does

Inspect the signal cable and make sure that

not look white)

 

none of the pins are bent.

 

• Perform Reset via OSD.

 

Adjust the R/G/B color settings or select the

 

 

Color Temperature via OSD.

Screen image is blurry or fuzzy

Press the button for two seconds to automatically adjust the image (for VGA mode only).

Adjust the Phase and Clock settings via OSD.

No sound or sound is low

Ensure that the audio cable is properly connected to the monitor and the computer

Adjust the volume settings of both your monitor and computer.

Ensure that the computer sound card driver is properly installed and activated.

3-

Chapter 3: General Instruction

Image 24
Contents User Guide E3379 First Edition August Copyright 2007 ASUSTeK Computer INC. All Rights ReservedContents Federal Communications Commission Statement Canadian Department of Communications StatementTCO Development ErgonomicsEnergy EmissionsSafety information Care & Cleaning Conventions used in this guideWhere to find more information Asus websites Optional documentationPackage contents WelcomeMonitor introduction Front viewRear connectors Back viewProduct introduction Adjusting the monitor Assembling the monitor baseDetaching the arm/base For Vesa wall mount Connecting the cables Turning on the monitorConnect the cables as the following instructions To connect the VGA/DVI cableSetup OSD On-Screen Display menu Press the Menu button to activate the OSD menuSpendid Image ColorSystem Setup Input SelectSpecifications summary VW195U TFT LCDSpecifications summary VW195T Specifications summary VW195S Specifications summary VW195D Troubleshooting FAQ Possible SolutionSupported operating modes PixelGeneral Instruction