Asus VS248HP manual Connecting the cables, Turning on the monitor

Page 14

2.4Connecting the cables

1.Connect the cables as the following instructions:

•To connect the power cord: connect one end of the power cord securely to the monitor’s AC input, the other end to a power outlet.

•To connect the VGA/HDMI/DVI cable:

a.Plug one end of the VGA/DVI/HDMI cable to the monitor’s VGA/DVI/ HDMI port.

b.Connect the other end of the VGA/DVI/HDMI cable to your computer's VGA/DVI/HDMI port.

c.Tighten the two screws to secure the VGA/DVI connector.

•To use the earphone (only when an HDMI cable is connected): connect the end with plug type to the monitor’s earphone jack.

When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu.

2.5Turning on the monitor

Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.

ASUS VS248 Series LED Monitor

2-3

Image 14

Contents User Guide E6235 First Edition January Copyright 2011 ASUSTeK Computer INC. All Rights ReservedContents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Conventions used in this guide Care & CleaningFollowing symptoms are normal with the monitor Where to find more information Asus websites Optional documentationPackage contents WelcomeMonitor introduction Front viewKensington lock slot Rear connectorsBack view Product introduction Adjusting the monitor Assembling the monitor arm/baseDetaching the arm/base for Vesa wall mount Connecting the cables Turning on the monitorSetup OSD On-Screen Display menu How to reconfigurePress , and to change the settings of the selected function OSD function introductionColor ImageOSD Setup System SetupAllows you to adjust the system Input SelectSpeciﬁcations summary VS248 TFT LCDTroubleshooting FAQ Possible SolutionSupported operating modes Primary