Edimax Technology IC-1500WG manual Software Installation, Installation Procedure

3.3. Installation Procedure

1.Unpack the Internet Camera package and verify that all the items listed in the Chapter 1 are provided.

2.Connect the Internet Camera to your network by attaching the network cable from the switch/router to the UTP port of the Internet Camera.

3.Connect the power adapter to the Internet Camera and plug the power adapter to power outlet. The Internet Camera will be powered on. When the Internet Camera is ready, the Ready LED will show an orange color.

Note: It is highly recommended to use the power adapter shipped with the Internet Camera, do NOT use any other power adapter from any sources.

4. Software Installation

yFollow the simple steps below to run the Install Wizard to guide you quickly through the Installation process.

The following installation is implemented in Windows XP. The installation procedures in Windows 98SE/Me/2000/Server 2003 are similar.

yInsert the CD shipped along with the Internet Camera into your CD-ROM drive. The “Autorun.exe” program should be executed automatically. If not, run “Autorun.exe” manually from “Autorun” folder in the CD.

yThe Install Wizard will show four selections, select the “IC-1500 / Wg” on left side if you want to install now or click “Exit” to install the program later.