yWhen the installation is completed, the system will auto run ”Administrator Utility“. On the Internet Camera, first page, the cameras found in the network will be listed in the left window. Choose the one you want to configure and click “Setting Wizard” to proceed.
N
“N” means the camera is new and not configured.
yPlease enter the default password “1234” and click “OK” to login to the IP setup page.
yInternet Camera is working through the network (TCP/IP Protocol). The IP address setting must be correct, or you cannot access the camera. The wizard program will detect the IP address status of your network automatically and suggest a free IP address for the Camera.