Channel Plus MDS-6A installation manual Important Safety Information

Page 3

MDS-6AINSTALLATION MANUAL

IMPORTANT SAFETY INFORMATION

Read Information—All the safety and operating information should be read before the appliance is operated.

Follow Information—All operating and use information should be followed.

Retain Information—The safety and operating information should be retained for future reference.

Heed Warnings—All warnings on the appliance and in the operating instructions should be heeded.

Wall Mounting—Mounting of this appliance should be done only by an authorized installer.

Ventilation—The appliances should be situated so that their location or position does not interfere with their proper ventilation. These appliances should never be placed near or over a radiator or heat register. These appliances should not be placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Non-UsePeriods—Appliances that are left unattended and unused for long periods of time should be de-energized.

Power Sources—The appliances should be connected to a power supply only of the type described in the operating instructions or as marked on each appliance. If you are not sure of the type of power supply to your home, consult your authorized Channel Plus dealer or local power company.

Grounding or Polarization—These audio products must be connected to a grounding-type alternating-current circuit on a dedi- cated circuit breaker. This is a safety feature. The green safety wire from the A.C. circuit must be connected.

Water and Moisture—To reduce the risk of electric shock or fire, these appliances should not be used near water––for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

© Channel Plus, Inc 2004 • All rights reserved. 4/04

Page 3

Image 3
Contents MDS-6A Table of Contents Important Safety Information Federal Communications Commission FCC Notice Feature Overview MDS-6A Specifications MDS-6A Front Panel Adjustments System Overview Connections and SettingsMCS Controllers and IR Receivers Wiring MCS Controllers to the MDS-6AMCS Controller Connections and MDS-6A Wiring System SpecsMCS Controller DIP Switch Configuration Wiring MCS ControllersSource and IR Connections Source and IR ConnectionsMCS Controller Operation TroubleshootingAudio Source Control InfraredMDS-6AINSTALLATION Manual MDS-6AINSTALLATION Manual Limited Warranty