Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal frequency. Select either one of the preset overclocking configuration options:
Manual - Allows you to individually set overclocking parameters. Auto - Loads the optimal settings for the system.
X.M.P. - If you install memory module(s) supporting the eXtreme Memory Profile X.M.P.) Technology, choose this item to set the profile(s) supported by your memory module(s) for optimizing the system performance.
The following two items appear only when you set the Ai Overclock Tuner item to [Manual].
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is
FSB/CPU External Frequency Synchronization
Front Side Bus | CPU External Frequency |
FSB 1600 | 400 MHz |
FSB 1333 | 333 MHz |
FSB 1066 | 266 MHz |
FSB 800 | 200 MHz |
PCIE Frequency [Auto]
Allows you to set the PCI Express frequency. Use the <+> and
The following configuration options for the following
eXtreme Memory Profile [Disabled]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you to enable or disable the eXtreme Memory Profile.
Configuration options: [Disabled] [Enabled]
CPU Ratio Setting [Auto]
Allows you to set the ratio between CPU Core Clock and the FSB Frequency. Configuration options: [Auto]
FSB Strap to North Bridge [Auto]
Allows you to adjust the FSB strap. Configuration options: [Auto] [200MHz] [266MHz] [333MHz] [400MHz]
DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. Configuration options: [Auto]
Chapter 2: BIOS information |