Asus p5p43t manual Installing a Dimm, Removing a Dimm

1.7.3Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.

To install a DIMM:

1.Press the retaining clips outward to unlock a DDR3 DIMM socket.

2.Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the socket.

1

Unlocked retaining clip

2

DDR3 DIMM notch

1

DIMM slot key

A DDR3 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM.

3.	Firmly insert the DIMM into the socket	3
	until the retaining clips snap back in place
	and the DIMM is properly seated.

Locked Retaining Clip

1.7.4Removing a DIMM

To remove a DIMM:

1.	Simultaneously press the retaining clips
	outward to unlock the DIMM.	2
	Support the DIMM lightly with	1
	your fingers when pressing the
	retaining clips. The DIMM might
	get damaged when it flips out with
	extra force.	1
		DDR3 DIMM notch

2.Remove the DIMM from the socket.

1-18 Chapter 1: Product introduction