2.4.2 USB Configuration
The items in this menu allows you to change the
USB Configuration |
| |
Module Version - |
| |
USB Devices Enabled: None |
| |
USB Function | [8 USB Ports] | |
Legacy USB Support | [Auto] | |
USB 2.0 | Controller | [Enabled] |
USB 2.0 | Controller Mode | [HiSpeed] |
BIOS EHCI | [Enabled] |
The Module Version and USB Devices Enabled items show the auto- detected values. If no USB device is detected, the item shows None.
USB Function [X USB Ports]
Allows you to enable or disable the USB function. Configuration options: [Disabled] [2 USB ports] [4 USB ports] [6 USB ports] [8 USB ports]
Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy operating systems (OS). Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]
BIOS EHCI Hand -off [Enabled]
Allows you to enable support for operating systems without an EHCI
DO NOT disable the BIOS EHCI Hand
ASUS |