Asus F2A55-M manual Network Stack

[Power Off]	The system goes into off state after an AC power loss.
[Last State]	The system goes into either off or on state, whatever the system state was
	before the AC power loss.

Power On By PS/2 Keyboard [Disabled]

[Disabled]	Disables the Power On by a PS/2 keyboard.
[Space Bar]	Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc]	Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]	Sets Power key on the PS/2 keyboard to turn on the system. This feature
	requires an ATX power supply that provides at least 1A on the +5VSB lead.

Power On By PS/2 Mouse [Disabled]

[Disabled]	Disables the Power On by a PS/2 mouse.
[Enabled]	Enables the Power On by a PS/2 mouse. This feature requires an ATX
	power supply that provides at least 1A on the +5VSB lead.

Power On By PME [Disabled]

[Disabled]	Disables the PME to wake up by PCI/PCIE devices.
[Enabled]	Allows you to turn on the system through a PCI/PCIE LAN or modem card.
	This feature requires an ATX power supply that provides at least 1A on the
	+5VSB lead.

Power On By Ring [Disabled]

[Disabled]	Disables Ring to generate a wake event.
[Enabled]	Enables Ring to generate a wake event.

Power On By RTC [Disabled]

[Disabled]	Disables RTC to generate a wake event.
[Enabled]	When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
	Minute/Second will become user-configurable with set values.

2.5.7Network Stack

Network Stack [Disable Link]

This item allows user to disable or enable the UEFI network stack. Configuration options: [Disable Link] [Enabled]

The following two items appear only when you set the previous item to [Enabled].

Ipv4 PXE Support [Enabled]

This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options: [Disable Link] [Enable]

Ipv6 PXE Support [Enabled]

This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options: [Disable Link] [Enable]

2-22 Chapter 2: Getting started