Asus F2A55-M manual Bootup NumLock State On, Full Screen Logo Enabled, Fast Boot Enabled

2.7.1Bootup NumLock State [On]

[On]	Sets the power-on state of the NumLock to [On].
[Off]	Sets the power-on state of the NumLock to [Off].

2.7.2Full Screen Logo [Enabled]

[Enabled]	Enables the full screen logo display feature.
[Disabled]	Disables the full screen logo display feature.

Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

Post Report [5 sec]

This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to set the waiting time for the system to display the post report. Configuration options: [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]

2.7.3Fast Boot [Enabled]

Enables or disables the fast boot function. Configuration options: [Disabled] [Enabled]

The following three items appear when Fast Boot is set to [Enabled].

USB Support [Partial In...]

[Disabled]	All the USB devices will be available only afater entering the operating
	system (OS).
[Full Initial]	All the USB devices will be available during POST and in OS.
[Partial Initial]	Specific USB device / port will be available before entering OS.

PS2 Devices Support [Enabled]

[Disabled]	Disables the PS2 devices support during POST.
[Enabled]	Enables the PS/2 devices support during POST.

Network Stack Driver Support [Disabled]

[Disabled]	Disables network stack driver support during POST.
[Enabled]	Enables network stack driver support during POST.

2.7.4Post Logo Delay Time [3 sec]

Allows you to set the Post Logo Delay Time. Configuration options: [0 sec] [1 sec] ~ [10 sec].

2.7.5Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

2.7.6Option ROM Messages [Force BIOS]

[Force BIOS]	The third-party ROM messages will be forced to display during the boot
	sequence.

ASUS F2A55-M 2-27