Connecting to the Insert jack | Crate Amplifiers MFX1200 manual

Guitar Amplifier

the high frequency output. Rotating the control clockwise increases the high frequency out- put. The High control provides a range of 28dB of boost or cut at 10kHz.

14:DSP LEVEL: Use this control to adjust the amount of digital signal processing to be applied to the signal. In the fully counterclock- wise position the output signal is “dry” (no effect applied). As you rotate the control clock- wise the amount of effect increases. The DSP may be turned on and off with a footswitch (#17).

15:DSP MODE: Use this control to select one of the ten digital effects. The nomenclature around the Mode control defines the five types of effects available. Each effect listed has two variations as described below:

DELAY: Slapback delay

Long delay w/regeneration

FLANGE: Light Flange Heavy Flange

CHORUS: Slow Chorus Fast Chorus

CHO-REV:Chorus w/small room reverb Chorus w/large room reverb

REVERB: Small room reverb Large room reverb

16:INSERT: Use this jack to connect an external signal processor to the amplifier. Refer to the adjacent illustration for additional information.

17:FOOTSWITCH: Use this jack to connect a two-button footswitch to the amplifier for remote control of channel selection and DSP on and off.

18:ON LED: This LED illuminates when the amplifier is turned on.

19:POWER: Use this switch to turn the ampli- fier on (top of the switch depressed) and off (bottom of the switch depressed).

20:POWER CORD (rear panel, not shown): The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and fre- quency requirements stated on the rear panel.

Do not attempt to defeat the safety ground connection.

Connecting to the Insert jack:

The Insert jack (#16) allow you to patch an external effects device into the amplifier prior to its power amp stage. Use Crate’s STP201, STP202 or STP203 stereo-to-mono Y cord or an adapter such as Crate’s YPP117 and two 1/4” mono signal cables to connect the effect as shown below.

Stereo-to-mono Y-cord:			Y-adapter and 2 cables:
to Insert	TIP		RETURN	TIP	to Insert
jack	RING		SEND	RING	jack
	SLEEVE		GROUND	SLEEVE
(STP201, 3'				(YPP117)
STP202, 6'				(YPP117)
STP203, 9')
				T	R I
				I P	N G
T		R I
I P		N G
				(1/4"-TO-1/4"
				MONO CABLES)
to	to			to	to
effect	effect			effect	effect
"OUT"	"IN"			"OUT"	"IN"
jack	jack			jack	jack
External Effect				External Effect

MFX1200 specifications

Crate Amplifiers have long been recognized for their ability to combine innovative technology with musical performance. One standout model in their lineup is the MFX1200, a powerful combo amplifier that takes the user experience to a whole new level. Designed primarily for guitarists, the MFX1200 boasts a plethora of features that cater to both beginners and seasoned professionals.

One of the most notable characteristics of the MFX1200 is its versatility. This amplifier comes equipped with an impressive 120 watts of power, allowing it to deliver resonant and loud sound capable of filling large spaces. The two-channel design, featuring both clean and overdrive channels, enables users to switch seamlessly between crystal-clear clean tones and gritty, high-gain sounds, making it perfect for a variety of musical genres.

The MFX1200 also includes an advanced digital effects processor, featuring a range of effects such as reverb, delay, chorus, and flanger. With multiple preset options, musicians can easily find and store their favorite effects, allowing for instant recall during performances. The user-friendly interface encourages experimentation, which can lead to unique sounds that help musicians creatively express themselves.

Another standout feature of the MFX1200 is its built-in speaker emulator, which allows players to connect directly to a mixing board or recording device without losing tone quality. This is particularly advantageous for live performances or studio recordings, giving players flexibility in how they capture their sound.

The amplifier's output section utilizes advanced Class A/B technology, ensuring that the MFX1200 maintains its warm, rich sound profile regardless of volume settings. Musicians will appreciate the dynamic range this amplifier can achieve, offering everything from soft, subtle passages to roaring leads without compromising clarity.

Additionally, the MFX1200 is constructed with durability in mind. The robust cabinet and high-quality components ensure that this amplifier can withstand the rigors of both tour and practice settings. Lightweight design further enhances portability, making it an excellent choice for guitarists on the go.

In conclusion, the Crate Amplifiers MFX1200 combines power, versatility, and modern technology, making it an ideal choice for guitarists looking to elevate their sound. With its feature-rich design, dynamic tonal capabilities, and durable construction, the MFX1200 stands out as a top contender in the world of guitar amplification. Whether for practice or performance, this amplifier delivers exceptional sound with ease.