Asus M2R-FVM manual Award Bios Flash Utility, Message Please input File Name

Page 46

2.1.3 Award BIOS Flash Utility

The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility.

1.Download the latest BIOS file from the ASUS web site. Rename the file to *.BIN and save it to a floppy disk.

Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file.

2.Copy the AwardBIOS Flash Utility (awdflash.exe) to the floppy disk with the latest BIOS file.

3.Boot the system in DOS mode using the bootable floppy disk you created earlier.

4.When the A:> appears, replace the bootable floppy disk with the floppy disk containing the new BIOS file and the Award BIOS Flash Utility.

5.At the prompt, type awdflash then press <Enter>. The Award BIOS Flash Utility screen appears.

AwardBIOS Flash Utility for ASUS V8.64

(C) Phoenix Technologies Ltd. All Rights Reserved

For RS485-SB600-M2R-FVM-00 DATE:05/01/2006 Flash Type - Winbond W39V040FC/C(4Mb)

File Name to Program:

Message: Please input File Name!

6.Type the BIOS file name in the File Name to Program field, then press <Enter>.

AwardBIOS Flash Utility for ASUS V8.64

(C) Phoenix Technologies Ltd. All Rights Reserved

For

 

RS485-SB600-M2R-FVM-00

DATE:05/01/2006

 

Flash Type -

Winbond W39V040FC/C(4Mb)

File Name to

Program: 0114.bin

 

 

 

 

 

 

ASUS M2R-FVM

2-3

Page 45 Page 47
Image 46
Page 45 Page 47
Contents M2R-FVMMotherboard E2614 First Edition May Contents Chapter Bios setup Onboard Device Configuration Federal Communications Commission Statement Canadian Department of Communications StatementElectrical safety Safety informationOperation safety About this guide Where to find more informationHow this guide is organized Typography Conventions used in this guideItalics M2R-FVM specifications summary LANSpecifications are subject to change without notice It supports Welcome Special features Product highlightsIeee 1394a support Innovative Asus features Onboard LED Before you proceedM2R-FVM Onboard LED Motherboard overview Placement directionScrew holes Motherboard layout Socket AM2Layout contents Central Processing Unit CPU Installing the CPUTo install a CPU Locate the CPU socket on the motherboard M2R-FVM CPU Socket AM2Gold triangle Small triangle Installing the heatsink and fan Hardware information M2R-FVM CPU Fan Connector figure illustrates the location of the DDR2 Dimm sockets System memoryOverview M2R-FVM 240-pin DDR2 Dimm SocketsMemory configurations Removing a Dimm To remove a Dimm Installing a DimmTo install a Dimm Simultaneously press Retaining clips outward to unlock DimmTo install an expansion card Installing an expansion cardConfiguring an expansion card Expansion slotsPCI slots Interrupt assignmentsStandard interrupt assignments PCI Express x1 slot PCI Express x16 slotClear RTC RAM Clrtc JumpersM2R-FVM Clear RTC RAM M2R-FVM Bios Recovery M2R-FVM Password SkipM2R-FVM USB Device Wake Up USBPW56 USBPW78Rear panel connectors ConnectorsLAN port LED indications Audio 2, 4, 6 or 8-channel configuration Internal connectorsM2R-FVM Floppy Disk Drive Connector M2R-FVM IDE Connector M2R-FVM Sata Connectors M2R-FVM Digital Audio ConnectorM2R-FVM Fan Connectors CPU and Chassis fan connectors 4-pin CPUFAN, 4-pin CHAFAN1M2R-FVM ATX Power Connector M2R-FVM USB 2.0 Connectors M2R-FVM AUX Audio ConnectorM2R-FVM Azalia Analog Front Panel Connector M2R-FVM Ieee 1394a ConnectorM2R-FVM System Panel Connector Bios setup Windows XP environment Managing and updating your BiosCreating a bootable floppy disk Windows 2000 environmentInsert Disk then press Enter or ESC to continue Post Asus EZ Flash utilityMessage Please wait Award Bios Flash Utility Message Please input File NameFlashing Complete Write OK No Update Write FailNo Update Write Fail Press F1 to ContinueChecksum E52BH Saving the current Bios fileNow Backup System Bios to File Message Please WaitAsus CrashFree Bios 2 utility Recovering the Bios from a floppy diskBios setup program Settings Bios menu screenMenu bar Menu items Configuration fieldsSub-menu items General help Advanced PowerPop-up window F1HelpSystem Time Legacy Diskette a DisabledMain menu System Date Day xx/xx/xxxxPrimary IDE Master/Slave PIO Mode AutoUdma Mode Auto Primary IDE Master AutoCapacity Access Mode AutoTransfer Mode CylinderExtended IDE Drive SATA1, 2, 3Extended Drive Auto F10 Save and ExitAdvanced menu Installed Memory xxx MBShows the size of installed memory Landing ZoneTiming Mode Auto AMD CoolʼnʼQuiet Function DisabledDram Configuration Bottom of UMA DramLDT & PCI Bus Control NB-SB Port Configuration DefaultSystem Bios Cacheable Disabled Pcie GFX Core Payload Size 64 BytesIRQ-xx assigned to Plug & Play O/S YesResources Controlled By Auto Plug & Play O/S YesSets the PCI Latency Timer by key in a DEC number PCI/VGA Palette Snoop DisabledPCI Latency Timer CLK Maximum Payload SizeIDE DMA transfer access Enabled Onboard Device ConfigurationOnChip IDE Channel0 Enabled IDE Prefetch Mode DisabledOnboard LAN Boot ROM Disabled Onboard 1394 Controller EnabledOnboard LAN Enabled South OnChip PCI DeviceOnChip USB Controller Enabled USB ConfigurationUSB 2.0 Controller Enabled USB Legacy support EnabledAcpi Apic Support Enabled Power menuAcpi Suspend Type S3STR AC Back After Power Loss Always On Modem Ring Resume DisabledPower Up On PCI Devices Disabled Power On by RTC AlarmHardware Monitor Removable Hard Disk Cdrom Disabled Boot menu1st ~ 4th Boot Device Removable Main Advanced PowerBoot Settings Configuration Password Check Supervisor Password User PasswordPress any key to continue Exit & Save Changes Load Setup DefaultsExit menu Exit & Discard Changes
Top Page Image Contents