Mitsubishi FR - S500 instruction manual Ecl, Alarm history 115 Clear

	Calibra-					Minimum		Factory		Cus-
Func-	tion		Indica-	Name	Setting Range		Setting		Refer
										tomer
tion	parame-		tion				Incre-	Setting	To:	Setting
	ters						ments
		<Japa-		FM terminal
		nese>
				calibration
	C1	900							111
		<NA,		AM terminal
		EC>
				calibration
		901
parameters	C3 (902)			Frequency setting	0 to 300%		0.1%	(Note 2)	74
				voltage bias
	C2 (902)			voltage bias	0 to 60Hz		0.1Hz	0Hz	74
				frequency
				Frequency setting				0%
Calibration
	C5 (904)			current bias	0 to 60Hz		0.1Hz	0Hz	74
	C4 (903)			Frequency setting	0 to 300%		0.1%	96%	74
				voltage gain				(Note 2)
				Frequency setting
				frequency
	C6 (904)			Frequency setting	0 to 300%		0.1%	20%	74
				current bias				(Note 2)
	C7 (905)			Frequency setting	0 to 300%		0.1%	100%	74
				current gain				(Note 2)
	C8 (269)			Parameter set by manufacturer. Do not set.
parameters					0: Not executed
	CLr			Parameter clear	1: parameter clear		1	0	115
					2: all clear
Clear				Alarm history	0: Not cleared,
	ECL *				1: Alarm history		1	0	115
				clear
					clear

Note 2: Settings may differ because of calibration parameters.

Parameters only for the type having the RS-485 communication function (When the parameter unit (FR-PU04) is used, operation from the operation panel is not accepted.)

	Com-				Minimum
	muni-					Factory		Cus-
Func-		Indica-	Name	Setting Range	Setting		Refer
tion	cation	tion			Incre-	Setting	To:	tomer
	Parame-							Setting
	ter				ments
				0 to 31:
Parameters	n1 (331)		Communication	Specify the	1	0	118
			station number	station number
				of the inverter.
			Communication	48: 4800bps,
	n2 (332)			96: 9600bps,	1	192	118
			speed
				192: 19200bps
Communication	n4 (334)		presence/		1	2	118
				check,
				0, 1: (Data length 8),
	n3 (333)		Stop bit length	10, 11: (Data	1	1	118
				length 7)
				0: Absent,
			Parity check	1: With odd parity
			absence	2: With even
				parity check

53

Pammeter List

2