Mitsubishi FR - S500 PU contrast adjustment, PU main display screen data selection, N16 100

2.15.3 PU contrast adjustment

By setting the communication parameter n15 "PU contrast adjustment", you can adjust the LCD contact of the parameter unit (FR-PU04). When using the FR-

PU04, adjust the numerical value to any brightness with the / keys and define that brightness with the WRITE key of the parameter unit.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
n15 (991)	PU contrast adjustment	58	0 to 63	Setting is enabled when Pr. 30 = "1"

The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).

CAUTION

When using the FR-PU04, you should press the WRITE key to store the LCD contrast setting.

2.15.4 PU main display screen data selection

You can choose the main display screen of the parameter unit (FR-PU04).

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
	PU main display
n16 (992)	screen data	0	0, 100	Setting is enabled when Pr. 30 = "1"
	selection

<Setting>

When you set 100 in n16, the monitor value changes depending on whether the inverter is at a stop or running.

		n16
	0		100
	During operation/stop	During stop	During operation
Output frequency	Output frequency	Set frequency	Output frequency
Output current		Output current
Alarm display		Alarm display

REMARKS

During an error, the output frequency at error occurrence appears. During MRS, the values displayed are the same as during a stop.

♦ Related parameters♦

Speed display ⇒ Pr. 37 "speed display" (refer to page 73)

134