Mitsubishi FR - S500 instruction manual List of Parameters Classified by Purpose of Use

2.2 List of Parameters Classified by Purpose of Use

Set the parameters according to the operating conditions. The following list indicates purpose of use and corresponding parameters.

Related to operation

Related to appication operation

Purpose of Use	Parameter Numbers
	Parameter numbers which must be set
Use of extended function parameters	Pr. 30
Operation mode selection	Pr. 53, Pr. 79
	(Communication parameters n10, n17)
Acceleration/deceleration	Pr. 7, Pr. 8, Pr. 16, Pr. 20, Pr. 29, Pr. 44,
time/pattern adjustment	Pr. 45
Selection of output characteristics	Pr. 3, Pr. 14, Pr. 19
optimum for load characteristics
Output frequency restriction (limit)	Pr. 1, Pr. 2
Operation over 60Hz <50Hz>	Pr. 1, Pr. 38, Pr. 39,
	Calibration parameter C4, C7
Adjustment of frequency setting signals	Pr. 38, Pr. 39, Pr. 73,
and outputs	Calibration parameter C2 to C7
Motor output torque adjustment	Pr. 0, Pr. 98
Brake operation adjustment	Pr. 10, Pr. 11, Pr. 12
	Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 24, Pr. 25,
Multi-speed operation	Pr. 26, Pr. 27, Pr. 80, Pr. 81, Pr. 82, Pr. 83,
	Pr. 84, Pr. 85, Pr. 86, Pr. 87
Jog operation	Pr. 15, Pr. 16
Frequency jump operation	Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr. 36
Automatic restart operation after	Pr. 57, Pr. 58
instantneous power failure
Slip compensation setting	Pr. 95 to Pr. 97
Setting of output characteristics	Pr. 3, Pr. 19, Pr. 71
matching the motor
Electromagnetic brake operation timing	Pr. 42, Pr. 64, Pr. 65
Sub-motor operation	Pr. 0, Pr. 3, Pr. 7, Pr. 8, Pr. 44, Pr. 45,
	Pr. 46, Pr. 47
Operation in communication with	Communication parameters n1 to n12
perasonal computer
Operation under PID control	Pr. 60 to Pr. 65, Pr. 73, Pr. 79, Pr. 88 to
	Pr. 94
Noise reduction	Pr. 70, Pr. 72

56