Mitsubishi FR - S500 instruction manual Function Parameter List

Pammeter List

2.1 Function (Parameter) List

				Minimum	Factory		Cus-
Parameter	Indica-	Name	Setting		Setting	Refer
	tion		Range	Setting	<EC	To:	tomer
				Increments			Setting
					version>
					6%/5%/
0		Torque boost	0 to 15%	0.1%	4%	58
					(Note 1)
1		Maximum frequency	0 to 120Hz	0.1Hz	60Hz	59
					<50Hz>
2		Minimum frequency	0 to 120Hz	0.1Hz	0Hz	59
3		Base frequency	0 to 120Hz	0.1Hz	60Hz	59
					<50Hz>
4 *		Multi-speed setting	0 to 120Hz	0.1Hz	60Hz	61
		(high speed)			<50Hz>
5 *		Multi-speed setting	0 to 120Hz	0.1Hz	30Hz	61
		(middle speed)
6 *		Multi-speed setting	0 to 120Hz	0.1Hz	10Hz	61
		(low speed)
7		Acceleration time	0 to 999s	0.1s	5s	62
8		Deceleration time	0 to 999s	0.1s	5s	62
		Electronic thermal O/L			Rated
9			0 to 50A	0.1A	output	64
		relay			current
30 *		Extended function	0, 1	1	0	72
		display selection
79		Operation mode	0 to 4, 7, 8	1	0	98
		selection

Note 1: The factory setting varies with the inverter capacity: 5% for FR-S540-1.5K and 2.2K, 4% for FR-S540-3.7K.

The extended function parameters are made valid by setting "1" in Pr. 30 "extended function display selection". (For full information on the way to set Pr. 30, refer to the instruction manual (basic).)

Func-	Pa-	Indica-			Minimum	Factory Refer		Cus-
	rame-		Name	Setting Range	Setting			tomer
tion	ter	tion			Increments	Setting	To:	Setting
			DC injection
	10		brake	0 to 120Hz	0.1Hz	3Hz	64
			operation
functions			frequency
			DC injection
	11		brake	0 to 10s	0.1s	0.5s	64
operation	13		operation time	0 to 60Hz	0.1Hz	0.5Hz	65
	12		DC injection	0 to 15%	0.1%	6%	64
			brake voltage
			Starting
Standard			frequency
				0: For constant-torque
				loads,
	14		Load pattern	1: For variable-torque	1	0	66
			selection	loads,

2:For vertical lift loads,

3:For vertical lift loads

46