Mitsubishi FR - S500 instruction manual Acceleration/deceleration time

CAUTION

1.The multi-speed settings override the main speeds (across terminals 2-5, 4-5, setting dial). When the multi-speed settings and setting dial are used in the combined operation mode (Pr. 79=3), the multi-speed settings have precedence.

2.The multi-speeds can also be set in the PU or external operation mode.

3.For 3-speed setting, if two or three speeds are simultaneously selected, priority is given to the frequency setting of the lower signal.

4.Pr. 24 to Pr. 27 and Pr. 80 to Pr. 87 settings have no priority between them.

5.The parameter values can be changed during operation.

6.When using this function with the jog signal, the jog signal has precedence.

REMARKS

* When terminal assignment is changed using Pr. 60 to Pr. 63, the other functions may be affected. Check the functions of the corresponding terminals before making setting.

The frequency-set external terminals have the following priority: Jog > multi-speed operation > AU (terminal 4) > terminal 2

♦ Related parameters♦

Maximum, minimum frequency setting ⇒ Pr. 1 "maximum frequency", Pr. 2 "minimum frequency" (refer to page 59)

Assignment of signals RH, RM, RL, REX to terminals ⇒ Pr. 60 to Pr. 63 (input terminal function selection) (refer to page 88)

External operation mode setting ⇒ Pr. 79 "operation mode selection" (refer to page 98)

Computer link mode ⇒ Pr. 79 "operation mode selection" (refer to page 98), communication parameter n10 "link start mode selection" (refer to page 131)

Speed command write ⇒ Communication parameter n9 "speed command write" (refer to page 130)

2.3.5 Acceleration/deceleration time

Used to set motor acceleration/			(Hz)	Pr.20
deceleration time.			frequency				Running
					Acceleration	Deceleration
							Time
Set a larger value for a slower speed							frequency
increase/decrease or a smaller value					Constant speed
for a faster speed			Output	Pr.44	Acceleration Deceleration Pr.45
increase/decrease.				Pr.7			Pr.8
					time	time
		Factory		Setting
Parameter	Name	Setting				Remarks
				Range
		<EC version>
						
7	Acceleration time	5s	0 to 999s
8	Deceleration time	5s	0 to 999s			

	Acceleration/	60Hz		Setting is enabled when
20	deceleration reference		1 to 120Hz
	frequency	<50Hz>		Pr. 30 = "1".
44	Second acceleration/	5s	0 to 999s	Setting is enabled when
	deceleration time			Pr. 30 = "1".
	Second deceleration		0 to 999s,	- - -:	Setting is
45		- - -		acceleration time =	enabled when
	time		- - -
				deceleration time.	Pr. 30 = "1".

62