Mitsubishi FR - S500 instruction manual Display Function Parameters, Monitor display, Led

2.6 Display Function Parameters

2.6.1 Monitor display

You can choose the display of the operation panel "monitor/frequency setting screen".

For the Pr. 54 function, the Japanese version has the FM terminal feature, and the NA and EC versions have the AM terminal feature.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
	Operation panel		0, 1,
52	display data	0
			100
	selection			Setting is enabled when Pr. 30 = "1"
54	FM (AM) terminal	0	0, 1
	function selection

POINT

You can also use the SET key to change the display. (Refer to the instruction

manual (basic) for the operation procedure.)

The pulse train output terminal FM (analog voltage output terminal AM) is available for signal output. (Make selection using the Pr. 54 "FM (AM) terminal function selection" value.)

<Setting>

		Parameter Setting
Signal Type	Unit	Pr. 52	Pr. 54	Full-Scale Value of FM
		Operation panel	FM (AM)	(AM) Level Meter
		LED	terminal
Output	Hz	0/100	0	Pr. 55 "frequency monitoring
frequency				reference"
Output current	A	1	1	Pr. 56 "current monitoring
				reference"

When "100" is set in Pr. 52, the monitor value changes depending on whether the inverter is during stop or running.

		Pr. 52
	0		100
	During running/stop	During stop	During running
Output frequency	Output frequency	Set frequency	Output frequency

REMARKS

•During an error, its definition appears.

•During reset, the values displayed are the same as during a stop.

•For selection of the parameter unit (FR-PU04) monitor display, refer to the communication parameter n16 "PU main display screen data selection". (Page 134)

CAUTION

The unit displayed on the operation panel is only A and other units are not displayed.

♦ Related parameters♦

Speed display ⇒ Pr. 37 "speed display" (refer to page 73)

Adjustment of FM (AM) level meter full-scale value ⇒ Calibration parameter C1 "FM (AM) terminal calibration" (refer to page 111)

Monitoring reference ⇒ Pr. 55 "frequency monitoring reference", Pr. 56 "current monitoring reference" (refer to page 84)

82