Mitsubishi FR - S500 Parameter Unit FR-PU04 Setting, Parameter unit display language switching

2.15 Parameter Unit (FR-PU04) Setting

When the optional parameter unit (FR-PU04) is connected to the RS-485 connector of the inverter, you can make the environment setting of the parameter unit.

CAUTION

When the parameter unit (FR-PU04) is used, operation from the operation panel is not accepted. (The stop key ( RESETSTOP key) is valid)

2.15.1 Parameter unit display language switching

By setting the communication parameter n13 "PU display language switching", you can switch the display language of the parameter unit to another.

		Factory
Parameter	Name	Setting	Setting	Remarks
		<NA, EC	Range
		version>
n13 (145)	PU display language	0	0 to 7	Setting is enabled when Pr. 30 = "1"
		<1>

The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).

<Setting>

n13 Setting		Display Language
0		Japanese
1		English
2		German
3		French
4		Spanish
5		Italian
6		Swedish
7		Finish
2.15.2	Buzzer sound control		2

By setting the communication parameter n14 "PU buzzer sound control", you can control "beep" produced when any of the parameter unit (FR-PU04) keys is operated.

Parameter	Name	Factory	Setting	Remarks
		Setting	Range
	PU buzzer sound			0: Without sound
n14 (990)		1	0, 1	1: With sound (factory setting)
	control			Setting is enabled when Pr. 30 = "1"

The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).

133