Mitsubishi FR - S500 Key input from, Operation panel Restarting method with Shown

(1) How to make a restart after a stop by the						RESETSTOP	key input from the
	operation panel (Restarting method with						shown)
1)	After completion of deceleration to				Speed
	a stop, switch off the STF or STR
	signal.							Time
		PU					PU
2)	Press the							key
		EXT key to		Control panel			EXT
	show PU. ........ (					RESETSTOP
			canceled)	STF	ON		key
		PU
3)	Press the			(STR) OFF
		EXT key to return to EXT.

4)Switch on the STF or STR signal. Stop and restart example for external operation

REMARKS

•By entering the reset signal (RES) during operation, the inverter shuts off its output while it is reset, the internal thermal summation value of the electronic overcurrent protection and the number of retries are reset, and the motor coasts.

•The Pr. 75 value can be set any time. Also, if parameter (all) clear is executed, this setting will not return to the initial value.

•When the inverter is stopped by the PU stop function, the display alternates between and . An alarm is not output.

(2)How to make a restart when a stop is made by the input from the PU

STOP RESET key

1)After completion of deceleration to a stop, switch off the STF or STR signal.

2)	Press the EXT	key
	. ..................... (	canceled)
3)	Switch on the STF or STR signal.

	Speed			Time
Control panel			EXT	key
STF	ON	STOP	key
		RESET
(STR) OFF

Stop and restart example for external operation

Besides the above operations, a restart can be made by performing a power-on reset
or resetting the inverter with the inverter's reset terminal.	2

REMARKS

•By entering the reset signal (RES) during operation, the inverter shuts off output while it is reset, the data of the electronic overcurrent protection and regenerative brake duty are reset, and the motor coasts.

•To resume operation, reset the inverter after confirming that the PU is connected securely.

•The Pr. 75 value can be set any time. Also, if parameter (all) clear is executed, this setting will not return to the initial value.

•When the inverter is stopped by the PU stop function, PS is displayed but an alarm is not output.

95