Mitsubishi FR - S500 instruction manual 181, Data Code Computer Func, Name Link Data Tion

			Data Code		Computer
Func-	Parameter	Name			Link Data
tion	Number		Read	Write	Setting
					Increments *
	C1 (900	FM (AM) terminal	5C	DC	
	(901))	calibration
	C2 (902)	Frequency setting	5E	DE	0.01Hz
parameters		voltage bias frequency
	C4 (903)	Frequency setting	5F	DF	0.1%
	C3 (902)	Frequency setting	5E	DE	0.1%
		voltage bias
Calibration	C6 (904)	voltage gain	60	E0	0.1%
		bias
	C5 (904)	Frequency setting current	60	E0	0.01Hz
		bias frequency
		Frequency setting current
	C7 (905)	Frequency setting current	61	E1	0.1%
		gain
	C8 (269)	Parameter set by manufacturer. Do not set.

Link Parameter

Extension

Setting

(Data Code

7F/FF)

1

1

(6C/EC=0)

1

(6C/EC=1)

1

(6C/EC=1)

1

(6C/EC=0)

1

(6C/EC=1)

1

(6C/EC=1)

Clear parameters	CLr	Parameter clear		FC	1	
	ECL	Alarm history clear		F4	1	
	n1 (331)	Communication station	1F	9F	1	3
		number
	n2 (332)	Communication speed	20	A0	1	3
	n3 (333)	Stop bit length	21	A1	1	3
	n4 (334)	Parity check	22	A2	1	3
		presence/absence
parameters	n7 (337)	Number of	25	A5	1	3
		Wait time setting
	n5 (335)	communication retries	23	A3	1	3
	n6 (336)	Communication check	24	A4	0.1s	3
		time interval
Communication
	n8 (338)	Operation command write	26	A6	1	3
	n9 (339)	Speed command write	27	A7	1	3
	n10 (340)	Link start mode selection	28	A8	1	3
	n11 (341)	CR/LF selection	29	A9	1	3
	n12 (342)	E2PROM write selection	2A	AA	1	3
	n13 (145)	PU display language	2D	AD	1	1
	n14 (990)	PU buzzer sound control	5A	DA	1	9
	n15 (991)	PU contrast adjustment	5B	DB	1	9
	n16 (992)	PU main display screen	5C	DC	1	9
		data selection
	n17 (993)	PU disconnection	5D	DD	1	9
		detection/PU setting lock

The parameter numbers within parentheses are those for use of the parameter unit (FR-PU04).

* Though parameter setting by RS-485 communication can be made in the setting increments indicated in the table, note that the valid setting increments are as indicated in the parameter list (page 46).

181