Asus PCE-N53 user manual Asus Wireless Dual-band Card

Page 19

PCE-N53 Wireless Dual-band Card Manual

Left-click the ASUS Wireless Dual-band Card Setting Utility system tray icon to display the following options:

•Wireless Radio On - Turns the wireless radio ON.

•Wireless Radio Off - Turns the wireless radio OFF.

•Search & Connect - Displays the available wireless networks.

Double-click the icon to launch the ASUS Wireless Dual-band Card Setting Utility.

Survey - Displays the connection status:

SSID - Displays the name of the wireless network that the WLAN card is connecting to.

MAC Address - Indicates the hardware address of the WLAN card. A MAC address is a unique identifier assigned to networking devices. It consists of six groups of two hexadecimal digits (0 through 9 and A through F) separated by colons, e.g. 00:E0:18:F0:05:C0.

Channel - Displays the channel of the wireless network. Current Data Rate - Displays the current data transmission rate. Network Type - Displays the WLAN card type such as infrastructure type. Security - Displays the encryption of the wireless networks.

Search- Lists the wireless networks that the WLAN card is connecting to.

16	ASUS Wireless Dual-band Card

Image 19

Contents E7147 / March PCE-N53Copyright 2012 ASUSTeK Computer Inc. All Rights Reserved Technical support Manufacturer contact informationASUSTeK Computer Inc. Asia-Pacific Asus Computer International AmericaTable of contents Prohibition of Co-location Federal Communications CommissionFCC Radiation Exposure Statement IC Warning Statement CE Mark WarningIC Radiation Exposure Statement Reach Asus Recycling/Takeback ServicesEC Declaration of Conformity Declaration of Conformity Authorised distributors Manufacturer ASUSTeK Computer IncAsus Computer GmbH EuropeHardware Package contentsIntroduction System requirementsClick Install to start the installation Installing the PCE-N53 driver and utilitiesComplete the installation Connecting to a wireless network manually Configuring PCE-N53 using Asus utilitySelect Use the WPS button, then click Next Connecting to a wireless network using WPSSelect Use PIN code Soft AP mode Windows XP/Vista/7 Asus Wireless Dual-band Card Software information Asus Wireless Dual-band Card Setting UtilityAsus Wlan Control Center Asus Wireless Dual-band Card Others Configuration BasicNetwork Type Configuration Encryption Manually Configuration AdvancedClick Windows Wireless to use it Configuring PCE-N53 using Windows WZC serviceConnection quality is bad and the signal strength is weak TroubleshootingHow do I verify that my Wlan card is installed properly? My Wlan card cannot connect to any Access PointsTCP/IP protocol does not bind to the Wlan Card Glossary Device Name Default KeyDhcp Dynamic Host Configuration Protocol Cofdm for 802.11a or 802.11gDSL Modem Digital Subscriber Line DNS Server Address Domain Name SystemDirect-Sequence Spread Spectrum for 802.11b Ethernet Extended Service Set ESSEssid Extended Service Set Identifier EncryptionIeee 802.11a 54Mbits/sec IeeeIeee 802.11g Ieee 802.11b 11Mbits/secInfrastructure IP Address ISP Internet Service ProviderMAC Address Media Access Control IP Internet ProtocolPPP Point-to-Point Protocol NIC Network Interface CardPacket Pass PhraseStation Ssid Service Set IdentifierWeca Wireless Ethernet Compatibility Alliance Radio Frequency RF Terms GHz, MHz, HzWlan Wireless Local Area Network WPA Wi-Fi Protected AccessRequirements