2.1 System requirements
Before installing the ASUS USB Wireless LAN Adapter, make sure that your system meets the following requirements:
•Intel® Pentium® 4 or AMD K7/K8 system
•Minimum 64MB system memory
•Windows® 98SE/ME/2000/XP operating system
•Optical drive (for software installation)
•An available USB port (USB 2.0 recommended because USB 1.1 cannot achieve maximum wireless performance)
2.2 Installation procedures
Follow these instructions to install the ASUS USB Wireless LAN Adapter in your computer.
1.Install the device drivers and utilities from the support CD.
2.Connect the device to your computer.
NOTE: You must install the ASUS USB Wireless LAN Adapter drivers and utilities before connecting the device to your computer.
2.2.1 Installing the device drivers and utilities
To install the device driver and utilities in your computer:
1.Insert the support CD to the optical drive.
2.Click “Install ASUS WLAN Card Utilities/Driver” when the ASUS Wireless LAN Card installation window appears.
3.The device drivers and
utilities are copied into your computer.
NOTE: If Autorun is NOT enabled in your computer, browse the contents of the support CD and double click the Setup.exe file to run the CD.
* See limitations on page
Chapter 2: Installation |