Boot Booster
The Boot Booster item in BIOS setup helps shorten your Eee PC bootup time. However, you MUST disable this BIOS item before you change any Eee PC components or perform system recovery (from USB flash disk, external optical drive or hidden partition). Follow the instructions below to disable Boot Booster:
1.Start the system and press <F2> on bootup to show the POST screen. Press <F2> again to enter the BIOS setup.
2.Set Boot Booster to [Disabled]
If you fail to see the POST screen or enter the BIOS setup by doing the instruction above, restart the system and try pressing <F2> repeatedly on bootup.
BIOS SETUP UTILITY
Main Advanced Security Boot Exit
Boot Device Priority
Boot Settings Configuration
OnBoard LAN Boot ROM | [Enabled] |
Boot Booster | [Disabled] |
Specifies the Boot Device Priority sequence.
A virtual floppy disk drive (Floppy Drive B: ) may appear when you set the
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit ESC Exit
v02.58 (C)Copyright
3.Press <F10> to save the configuration and restart Eee PC.
Remember to enable Boot Booster after you complete hardware change or system recovery.
Chapter 4: Support DVD & System Recovery |