Asus WL-520GC, WL-520GU user manual Setting up Virtual Server in Your LAN, Authentication

WL-520GU/GC Broad Range Wireless Family Router User Manual

Authentication

The authentication methods supported by WL-520GU/GC include: Open, Shared key, WPA-Personal, WPA2-Personal, WPA-Auto-Personal (TKIP. AES. TKIP+AES), WPA-Enterprise, WPA2-Enterprise, WPA-Auto-Enterprise (TKIP. AES. TKIP+AES), and Radius with 802.1x.

Open: This option disables authentication protection for wireless network.

Shared Key: This mode uses the WEP keys currently in use for authentication.

WPA-Enterprise, WPA2-Enterprise, WPA-Personal, WPA2-Personal, WPA- Auto-Personal: WPA stands for WiFi-Protected Access. WPA provides two security modes: WPA for enterprise network, and WPA-PSK for home and SOHO users. For enterprise network, WPA uses the already existing RADIUS server for authentication; for home and SOHO user, it provides Pre-Shared Key (PSK) for user identification. The Pre-Shared Key consists of 8 to 64 characters.

Radius with 802.1x: Similar with WPA, this solution also uses RADIUS server

for authentication. The difference lays on the encryption mothods: WPA adopts TKIP or AES encryption methods, while Radius with 802.1X does not provide encryption.

When authentication and encryption are set, click Finish to save the settings and restart the wireless router.

3) Setting up Virtual Server in Your LAN

Virtual Server is a Network Address Translation (NAT) function which turns a computer within a LAN into a server by allowing data packets of certain service, such as HTTP, from Internet.

1.Click Virtual Server in NAT Setting folder to open the NAT configuration page.

2.Select Yes to enable virtual server. For example, if host 192.168.1.100 is FTP server which is to be accessed by Internet user, it means all packets from Internet with

destination port as 21 are to be directed to the host. Set Well-known Application to

FTP. Port range to 21, Local

IP to the host IP, Local Port to 21, Protocol to TCP.

3. Click Finish.

4.Click Save & Restart to restart the wireless router and activate the settings.

14