Asus WL-520GC, WL-520GU user manual Status Indicators, Wall Mounting Option

WL-520GU/GC Broad Range Wireless Family Router User Manual

2) Status Indicators

		PWR AIR WAN	LAN
	WL-520GU	AIR WAN LAN1 LAN2 LAN3 LAN4
	125M High Speed
PWR (Power)
Off	No power
On	System ready
Flashing-slow	Firmware upgrade failed/Rescure Mode
Flashing-quick	EZsetup processing/Rescure Mode
AIR (Wireless Network)
Off	No power
On	Wireless system ready/Radio-off
Flashing	Transmitting or receiving data (Through Wireless)
WAN (Wide Area Network)
Off	No power or no physical connection
On	Has physical connection to an Ethernet network
Flashing	Transmitting or receiving data (Through Ethernet Cable)
LAN 1-4 (Local Area Network)
Off	No power or no physical connection
On	Has physical connection to an Ethernet network
Flashing	Transmitting or receiving data (Through Ethernet Cable)

3) Wall Mounting Option

Out of the box, ASUS WL-520GU/GC Wireless Router is designed to sit on a raised flat surface like a file cabinet or book shelf. The unit may also be converted for mounting to a wall or ceiling.

Follow these steps to mount the ASUS Wireless Router to a wall:

1.Look on the underside for the two mounting hooks.

2.Mark two upper holes in a flat surface.

3.Tighten two screws until only 1/4'' is showing.

4.Latch the hooks of the ASUS Wireless Router onto the screws.

Note: Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the screws or if it is too loose.