Chauvet ART-575W user manual Installation, Ori Ent At Io N, Floor M Ount ING, Russ M Ount ING

Setup

Installation

ORI ENT AT IO N

This fixture is designed to achieve an Ingress Protection Rating of 54 only when the fixture’s base is attached to a level horizontal surface. The ART-575W can be mounted both upright and on a truss system.

Warnin g

It is important never to obstruct the fan or vents pathway.

∙When selecting installation location, take into consideration lamp replacement access and routine maintenance.

∙Safety cables should always be used.

∙The fixture must have a minimum of 1 meter distance from combustible materials.

126

Floor mount

FLOOR M OUNT ING

1)If connected, be sure to always disconnect from main power before installing fixture.

2)The ART-575W is constructed with mounting bracket/yoke.

3)Bolt fixture onto a leveled floor surface using floor mount holes and 3/8” diameter bolts.

T RUSS M OUNT ING

The ART-575W includes 3 clamp mounting brackets to which half- coupler pipe clamps can be bolted.

1)Verify the structure can hold 10 times the weight of all fixtures to-be installed.

2)Attach a minimum of two to three clamps where illustrated.

Clamp

Base

ART-575W User Manual 8 2006-06-15/17:08