XDMA6540 OPERATION
Bluetooth® Operation
Manual Dialing
Recent Calls List
Redialing the last number
Making a Phone Call
•Press 
once. "Enter Phone Number" will be shown, then an "_" will appear on the display.
•Using the remote control, enter the phone number using the 
on the remote control or XDMA6540 front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use the Bluetooth function of the XDMA6540.
•Press 
twice from Bluetooth mode to view the 10 most recent phone calls that were dialed, received or missed while connected to the XDMA6540.
•Turn the volume knob to cycle through the recent phone numbers. Press SELECT or 
to dial the phone number.
To redial the last phone number, press 
three times from Bluetooth mode. Dialing will begin automatically.
Receiving a Phone Call
Ending a Phone Call
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the display and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume level of the XDMA6540. The incoming ring tone may not be heard if the volume is set to a low level or mute is activated.
•Press 
to receive the incoming phone call.
•Press 
to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all phone calls will be received automatically.
During an active phone call, press 
to end a phone call. If the phone call was received when listening to music in another mode, the XDMA6540 will resume the previous mode.
29