Installation Processes

The following procedures are to assist you with installing your Cisco camera accessories.

•Lens Installation Procedure, page 5

Lens Installation Procedure

Follow the instructions below to replace the supplied lens with any C or CS type lens.

STEP 1 Unscrew the current lens on your PVC2300 or WVC2300 IP Camera.

STEP 2 Ensure that the new lens is clean because any dirt may degrade the quality of video images. Save the lens opening dust cap and replace the dust cap if you remove the lens.

STEP 3 Screw the new lens to the opening of the IP Camera. The IP camera accepts both C and CS-mount lenses.

•If you are using a CS mount lens, screw the lens into the lens opening.

•If you are using the C-mount lens then you need to use the included C- mount 5mm lens adapter ring.

Cisco Small Business Camera Accessories Administration Guide