D-Link 2600 manual Hub

Dual-Speed Stackable Hub Web-based Management User’s Guide

The information is described as follows:

♦Current Serial Port Setting Displays the current session, either Console or Out-of-band.

♦ System Restart Serial Port Setting	You can choose to select Console or
Out-of-bandmanagement upon reboot.

♦Baud Rate This is cps (characters per second) of the information exchange between the Hub and it’s console manager.

♦Character Size This is the number of bits in the byte unit of the information exchange between Hub and console manager.

♦Stop Bit This bit marks the end of a unit of transmission (normally a byte or character).

♦Protocol This is the protocol used by the Hub for out-of-band (dial-up) management.

♦	System Restart Out-of-Band Baud Rate This sets the baud rate (cps) on the
	Hub.
♦	Out-of-Band Dial Up Phone Number Administrator can place number here for
	reference.

8