Group (Hub) Configuration
Clicking Fault → Group/Port Control → [Hub ID] will show the current configuration information of the Hub.
The information is described as follows:
♦Serial Number This is a unique hardware serial number of the Hub.
♦Description This is the product ID.
♦Slot 1/ Slot 2 Type These indicate the type of module, if present, in the
♦Repeater Type Product information of the Hub.
♦Group Role The role of the Hub within the stack, either
♦Hardware Revision The version of the repeater hardware board used in this Hub.
♦Status Tells whether the Hub is up or down.
♦Last Operation Status Change Time of the last status change for the Hub. A status change occurs when the Hub goes online or
9