Advantech MIC-3081 manual Replacing the Hot-swap Fan and Air Filter

2.3.6 Replacing the Hot-swap Fan and Air Filter

The MIC-3081 provides two hot-swap fans underneath the card slots and two blowers on the top. Each fan/blower can be individually replaced. This can be done without turning off the system power or interrupting system operation.

Follow these steps to replace a fan:

1.Unfasten the fan's holder.

2.Slide the fan's holder out.

3.Replace the old fan with a new one.

4.Slide the fan's holder in.

5.Fasten the new fan's holder.

The air filter may become dirty after a period of time. Follow these steps to replace a filter:

1.Remove the filter cover.

2.Replace the dirty filter with a clean one.

3.Reattach the filter cover.

Repeat steps 1 to 3 to replace other filters.

MIC-3081 User Manual --- Page 13