This document provides information for installing and connecting peripheral hardware components to your Dell™ PowerEdge™ Cluster SE400 and SL400 systems. The configuration information in this document is specific to Microsoft® Windows NT® Server 4.0, Enterprise Edition and Windows® 2000 Advanced Server operating systems.
This document provides the following information:
•PowerVault™ and PowerEdge systems that support Cluster SE400 and SL400 cluster configurations
•PowerEdge systems that work together in a Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server cluster configuration
•PCI slot information for installing Dell OpenManage™ Remote Assistant Card II (DRAC II cards), Dell Remote Access Card III (DRAC III cards), NICs, and RAID controllers in your cluster nodes
NOTE: Configurations not listed in this document are not certified or supported by Dell or Microsoft.
Supported Cluster Configurations
Table
Ta b l e 1 - 1 . S u p p o r t e d C l u s t e r C o n f i g u r a t i o n s
PowerEdge | Supported | Supported | Supported Cluster |
Cluster | PowerEdge | PowerVault Storage | Interconnect (for the |
| Systems | Systems | Private Network) |
|
|
|
|
SE400 | 1550, 1650, 2400, | 220S and 221S | Any supported NIC |
| 2450, 2500, 2550, |
|
|
| 2600, 2650, 4400, |
|
|
| 4600, 6400, 6450, |
|
|
| 6600, 6650, and 8450 |
|
|
SL400 1550, 2400, 2450, 220S and 221S 2500, 2550, 4400,
6400, 6450, and 8450
Emulex cluster local area network (cLAN) high performance,
Platform Guide