This type of installation requires that you provide a dynamic IP address for each computer on your network. You will need a
To complete the installation, please follow these steps:
1.Connect the Router/Gateway to a Broadband connection (e.g., a Cable modem or a DSL modem.)
2.Connect the 802.11g Access Point to the router.
3.Install the C54U Wireless USB Stick Adapter into a laptop or desktop computer on your wireless network
4.Check the Device Manager to confirm that the wireless adapter is installed correctly. Please refer to the Networking Basics section in this manual entitled: Checking the Installation of the Drivers for the Wireless Adapter.
5.By default, the wireless adapter is set to obtain a Dynamic IP Address. If you are having difficulty connecting, check to make sure that the IP Address of the wireless adapter is within the IP address range of your network. Please refer to the Networking Basics section in this manual entitled: Checking the IP Address.
11