Black Box RS-232485/422 Converter Plus, RS-232485/422 Opto-Isolator/Converter, IC109C, IC108A manual

Page 15

RS-232↔485/422 CONVERTERS

3.2 DCE/DTE Configuration

This section contains block diagrams (Figures 2 and 4) and jumper and switch settings (Tables 1 and 2) for DCE/DTE operation. For a detailed description of the jumpers and switches, see Section 3.1.

Figure 2. Simplified Functional Block Diagram (DCE Operation).

14

Image 15

Contents IC109AE FCC and IC RFI Statements RS-232↔485/422 Converters NOM Statement Trademarks Used in this Manual Contents Specifications Specifications Introduction Jumper and Switch Configuration InstallationLayout of the Printed Circuit Board RS-232↔485/422 Converter as DCE XW1A 8-Position Shunt Driver Enabled by Data Point-to-Point DCE/DTE Configuration Function Jumper Requirements RS-232↔485/422 Converters Installation RS-232↔485/422 Converters Simplified Functional Block Diagram DTE Operation DTE Jumper Settings Installation Typical Applications Point-To-Point, 4-Wire Full- or Half-Duplex Multipoint, 4-Wire Half- or Full-Duplex Multipoint, 2-Wire Half-Duplex Sample Multipoint Operation Installation DCE DTE Appendix A. PinningPin Name Description XW1B Quick Reference User-Selectable OptionsQuick Reference USER-SELECTABLE Options Copyright 2002. Black Box Corporation. All rights reserved