Black Box LBPS301A, LBPS304A, LB304A user manual 2 48-VDC DC Jack, DIP switch settings

Chapter 4: Installation

Step 1: Connect the DC power cord to the pluggable terminal block on the Hardened Ethernet Extender, and then plug it into a standard DC outlet.

Step 2: Disconnect the power cord if you want to shut down the Hardened Ethernet Extender.

4.4.2 48-VDC DC Jack

Step 1: Connect the supplied AC to DC power adapter to the receptacle on the top side of the Hardened Ethernet Extender.

Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage.

Figure 4-4.

Table 4-1. Power Input Assignment.

Power	Signal	Voltage	Connector
Power 1		48 VDC	DC jack
	+	24–48 VDC
Power 2
	-	Power Ground	Terminal block
Power 3	+	24–48 VDC

-Power Ground Earth Ground

Table 4-2. DIP switch settings.

DIP switch	Description
Loc	The device operates in local mode.
Rmt	The device operates in remote mode.

Page 20 724-746-5500 blackbox.com