Hardened VDSL Ethernet Extender
Installation
This chapter gives
Ethernet Extender.
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:
•The ambient temperature should be between
•The relative humidity should be less than 95 percent,
•Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards.
•Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes of the equipment.
•The power outlet should be within 1.8 meters of the product.
DIN Rail Mounting
Fix the DIN rail attachment plate to the back panel of the Hardened VDSL Ethernet Extender.
Installation: Place the Hardened VDSL Ethernet Extender on the DIN rail from above using the slot. Push the front of the Hardened VDSL Ethernet Extender toward the mounting surface until it audibly snaps into place.
Removal: Pull out the lower edge and then remove the Hardened VDSL Ethernet Extender from the DIN rail.
10