Hardened VDSL Ethernet Extender
Connecting to Power
Redundant DC Terminal Block Power Inputs or 12VDC DC Jack:
12VDC DC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of the Hardened VDSL Ethernet Extender.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a standard AC outlet with the appropriate AC voltage.
Redundant DC Terminal Block Power Inputs
There are two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the Hardened VDSL Ethernet Extender.
Step 1: Connect the DC power cord to the
Step 2: Disconnect the power cord if you want to shut down the
Hardened VDSL Ethernet Extender.
Power Input Assignment
Power1 |
| 12VDC | DC Jack |
Power2 | ＋ |
| |
－ | Power Ground |
| |
|
| ||
Power3 | ＋ | Terminal Block | |
－ | Power Ground |
| |
|
| ||
|
| Earth Ground |
|
|
|
| |
DIP Switch Assignment |
| ||
Loc | The device operates in local mode | ||
Rmt | The device operates in remote mode | ||
11