Black Box GSHDSL Two-Wire Extender/NTU manual Connect the G.SHDSL Port, Power UP Indication

Connect the G.SHDSL Port

2.2 MODELS WITH EXTERNAL DC POWER SUPPLY

The 36-60 VDC DC to DC adapter is supplied with the DC version of the G.SHDSL.bis NTU. The black and red leads plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack on the G.SHDSL.bis NTU. (See Figure 1.)

Figure 1. DC Power Supply

Figure 2. ME233A-R2

2.3 POWER UP INDICATION

Verify that the Power LED (see Figure 2) illuminates and remains lit.

Once the LB510A-R2 is properly configured and installed, it should operate transpar- ently. The following sections describe power-up and reading the LED status monitors.

3.CONNECT THE G.SHDSL PORT

1.Obtain single-twisted-pair cable with an RJ-45 plug connector at each end.