Black Box ACS4004A-R2, ACS4011A-R2, ACS4002A-R2-MM manual Interconnection Cable Requirements

Page 15

Chapter 3: Installation

3.2 Interconnection Cable Requirements

To connect the Local and Remote units you will need:

•USB: Connect the supplied USB CPU cable to your CPU (KVM switch, etc.). Make sure that the connection is tension-free.

•DVI: Connect the supplied DVI CPU cable to your CPU (KVM switch, etc.). Make sure that the connection is tension-free.

•VGA/DVI: Connect the supplied VGA to DVI CPU cable to your CPU (KVM, switch, etc.). Make sure that the connection is tension-free.

•CATx cable: Recommended cable: S/UTP (CATx) according EIA/TIA 56A, TSB 36 or Digital STP 17-03170. Four-pair 24 AWG connection according EIA/TIA 568A (10BASE-T). Use of cables from a higher category (CAT5e, CAT6, CAT7) is possible.

NOTE: The use of unshielded CATx Cable is possible, but because of the higher electromagnetic noise/sensitivity the device class may not be reached.

NOTE: The use of flexible cables (patch cable) 26 or 27 AWG is possible. Because of the higher loss of the stranded cables, the maximum distance is reduced to approximately half the value of solid cables.

NOTE: A point-to-point connection is required. Having one or more patch panels in the line is possible and allowed. Not allowed is a connection from the CATx link interface (RJ-45) to any other products, especially telecommunications or network equipment.

• Fiber cable: Two strands of fiber are required for single-head devices, four strands for dual-head devices.

NOTE: The maximum distance will depend on device type and on fiber type used.

Recommended cables:

ACSxxxxA-MM: 50-µ multimode distance approximately 1312 ft. (400 m)

ACSxxxxA-MM: 62.5-μ multimode distance approximately 656 ft. (200 m)

ACSxxxxA-SM: Single-mode distance approximately 32,808 ft. (10 km)

A point-to-point connection is required. You can have one or more patch panels in the line. You can’t have a connection from the fiber link interface (LC) to any other products, especially telecommunications or network equipment.

Single-mode devices often work well on multimode fibers, but the reverse isn’t true. In addition, however, single-mode devices on multimode fibers may possibly double the distance on multimode fibers. There is no guarantee of this, and users are asked to perform tests within their own environments.

• Power supply: Connect the supplied 5-VDC power supplies to the plug terminal on the rear of both local and remote units.

ACS4002A-R2

724-746-5500 blackbox.com

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DVI-D CATx/Fiber KVM Extenders FCC Statement NOM Statement Trademarks Used in this Manual TrademarksTable of Contents Specifications SpecificationsQuick Setup SetupOverview OverviewGlossary IntroductionDVI-D/-I CATx KVM Extender system example Features Product Range How to Use This Guide Installation InstallationWhat‘s included Interconnection Cable Requirements System Setup ACS4002A-R2-xx, local/remote unit rear view CATx ACS4002A-R2-xx local/remote unit rear view fiber ACS40011A-R2 /ACS40011A-R2-xx remote unit ACS40011A-R2-xx remote unit CATx rear view LED Information Diagnostic LEDsService Setup Service SetupSetup at the Local Unit DDC Color Depth Setup at the Remote Unit Infrared Remote Control IR-RC Setup for the ACS4011A-R2 On-screen Display OSDService Setup Using the IR-RC Close the OSD, and restore normal keyboard and mouse 12. Brightness/Contrast adjustment 13. Scale Mode adjustment 15. Color Temperature submenu 17. Tools menu 19. The Auto Configuration submenu, from the Tools menu 20. The DDC Configuration menu Setup Instructions for VGA Input ACS4011A-R2 Family Service Setup Troubleshooting Troubleshooting Monitor ErrorsUSB Keyboard and USB Mouse Errors Other Errors USB-HID Device ErrorsAppendix a Sample Applications Appendix a Sample ApplicationsFigure A-2. DVI-D CATx KVM Extender supporting VGA and DVI-D Appendix B Rackmount Options Appendix B Rackmount OptionsFigure B-2. Mounting for one or two devices Appendix B Rackmount Options Figure B-6. Mounting for one or two devices Appendix C Technical Support Appendix C Technical SupportCountry Web Site and Email Phone Fax Info@blackbox.com Appendix D Supported Video Modes Appendix D Supported Video Modes900 Appendix E Information in Internal DDC Appendix E Information in Internal DDCAppendix F Connectors Appendix F ConnectorsAnalog Green Analog Ground USB Connector, USB Type B Connector at the Local Unit Programming Port Blackbox.com About Black Box Black Box Tech Support FREE! Live /7

ACS4004A-R2, ACS4002A-R2, ACS4002A-R2-SM, ACS4004A-R2-SM, ACS4004A-R2-MM specifications

The Black Box ACS4002A-R2-MM and ACS4011A-R2-SM are part of an advanced series of DVI-D CATx/Fiber KVM extenders. These high-performance extenders bridge the gap between computer systems and remote displays, offering impressive solutions for various industries including broadcasting, digital signage, and corporate environments.

The ACS4002A-R2-MM model uses multi-mode fiber technology, enabling it to transmit video at high resolutions up to 1920x1200 at distances of up to 300 meters. It's designed for seamless integration into existing infrastructures, utilizing standard CAT5e cables in conjunction with fiber optics. This versatility ensures that installations are both efficient and cost-effective, making it ideal for expansive setups.

On the other hand, the ACS4011A-R2-SM variant specializes in single-mode fiber, pushing the transmission range even further. It can deliver high-definition video from a computer to a display up to a remarkable distance of 10 kilometers. This characteristic is particularly beneficial in large-scale operations, where the distance between systems can be considerable.

One standout feature of these KVM extenders is their ability to support DVI-D signals. This ensures immaculate video quality without degradation, which is critical for applications demanding high resolution and color fidelity. Both models also support USB pass-through, facilitating the connection of peripherals such as keyboards and mice. This enhances user experience, allowing for full control of the remote system from a distance.

In terms of installation, the ACS4002A-R2-MM and ACS4011A-R2-SM are designed for user-friendliness. They come with plug-and-play capabilities that simplify setup and minimize downtime. Furthermore, their robust design ensures reliable performance, even in challenging environments, making them suitable for various demanding applications.

The technologies embedded within the ACS4011A-R2-MM and ACS4011A-R2 offer dual power inputs for redundancy, ensuring that the systems remain operational during unexpected outages. This level of reliability is crucial for mission-critical environments where uptime is paramount.

Whether upgrading an existing video system or designing a new one, the Black Box ACS4002A-R2-MM and ACS4011A-R2-SM KVM extenders present a superior solution for high-performance video transmission, combining advanced features, impressive technologies, and unparalleled reliability.
Top Page Image Contents